Customer advice for Draughtmaster M20 Dispense Systems using Ecolab

The following procedure will help to protect the lines when not in use 

• Turn off the remote/flash coolers. This will prevent lines freezing 
• Carry out a standard line clean on all dispense lines using the on screen display (normal procedure)

Following the clean, the lines will need to be flushed out with fresh water every seven days using the rinse only feature (in the same way as the last part of the normal clean) 

Under no circumstances leave the lines soaking in water, as it may go stagnant, causing irreparable damage to the python and associated equipment, resulting in tainted beer.

If you can’t gain access to the system to blow out the lines or charge the system with Guardian (outlet closure) then the last option would be to leave the system in beer.

When re-opening an outlet:

• Carry out a full line clean of the dispense system as normal; and
• Ensure remote/flash cooler is turned back on for beer dispense.